The Dirac Processor Standalone provides desktop-level audio correction by Dirac for Windows 10 devices.
In order to use Dirac Processor Standalone, you will need to download and install two components: the Dirac Live® 3 application (3.0.x) and the Dirac Processor Standalone (1.4.x). Dirac Live® 3 is used to measure and generate filters, while the Processor Standalone stores the corresponding filters and processes audio data.
You can download Dirac Live® 3 and Dirac Processor Standalone here. Make sure that your computer is connected to the internet for licensing purposes.
Open the files and follow the installation procedures.
When completed, the Dirac Processor Standalone will be installed to the following location: C:\Program Files\Dirac\Dirac Live Processor
Open the Windows Control Panel and select Sound. This opens Windows Sound Settings.
The Standalone is not active until the application Dirac Processor Standalone is opened, which comes later.
Select your default sound device and click Configure.
Select the configuration that you want to use. Note: For some sound cards that use ASIO, it is not possible or necessary to select a Multichannel configuration here. If you are using WASAPI driver, it is necessary to select the proper configuration.
Open the Dirac Processor Standalone.
Log in to your Dirac account if necessary.
The Processor window will look empty the first time you open it. You will populate this window with filters after you have created them in Dirac Live® 3.
After starting Dirac Processor Standalone, the new sound device will be active and selected as the default sound device.
In Dirac Processor Standalone, select Options > Audio Settings.
Select the number of channels relevant for your system.
Select Audio Device type from the following (Windows Audio modes are WASAPI modes):
When using Windows Audio settings, you will use the Windows Sound Settings panel (described above) to change channel configuration and sample rate, etc.
When using ASIO settings, you will use Processor + the ASIO driver program to change channel configuration and sample rate, etc.
Select your "normal" sound device as output. If you have a ASIO drivers for your sound card, select ASIO as the Audio Device Type.
Click “Test” to ensure sound playback is functional. If so, close the Audio Settings window.
Play a sound from your media player or web browser to make sure the level meters are moving and that the sound is audible.
If you experience dropouts in the sound, experiment with different buffer-sizes. 10.0 ms latency is recommended. However, it is not available for some sample rates.
In some media players like JRiver, you need to select the output manually. In this case, make sure "Standalone (Dirac)" is selected.
You are now ready to perform a measurement and create your first filters.
Continue with Dirac Live® 3 - Quick Start Guide or Dirac Live® 3 - User Manual. Happy listening!