Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »

*Download

https://artifactory.dirac.services/artifactory/live/porter/mac/update/beta/DiracLiveProcessor-1.4.6-Beta-Darwin.pkg

*Run installer

*Restart computer

*Start DiracLiveProcessor in Applications

*In Dirac Live Processor, go to Option→Audio Settings...

*In Output select the audio interface you want to use. Do not select "Dirac Virtual Audio Device"


*Open Audio MIDI Setup and make sure Dirac Virtual Audio Device is in the list of soundcards

*Play a sound and make sure the sound is passing through the Dirac Live Processor

You are now ready to perform a measurement and create your first filters.

Continue with Dirac Live® 3 - Quick Start Guide or Dirac Live® 3 - User Manual. Happy listening!


Troubleshooting

No Signal

Open Options→Audio Settings... dialog box and the signal should come back.

Make sure Dirac Virtual Audio Device is selected as the system Audio Output.

Dirac Virtual Audio Device does not appear in device select

Open Finder and select Go → Go to Folder

Paste /Library/Audio/Plug-Ins

If you have a folder named "HAL", restart your device to make sure your installation is complete, and then check for the Dirac Virtual Audio Device again.

If you do not have the "HAL" folder, create one and reinstall the Dirac Processor. Then check whether VAD.driver appears in the HAL folder.

Processor is silent

Activate Processor as described above, ensuring that Processor recognizes signal from your Mac (i.e. that the "No Signal" warning does not appear).

If Processor is still silent, open Control Center → Sound or Audio MIDI Setup and select your desired output device as sound output.

Using the volume keys or slider, turn the volume up for the output device. The volume level here  becomes the maximum level that Processor can utilize.

  • For example, Realtek USB2.0 Audio is your desired output device. You select this as output in Control Center and turn the volume to 60%. When you activate Processor (by switching the system output to Dirac Virtual Audio Device), it can only output 60% volume at max. Pushing the Realtek output to 100% means that Processor can output 100% at max.

Reactivate Processor by switching output back to Dirac Virtual Audio via Control Center → Sound or Audio MIDI Setup.

Adjust volume as desired using the volume keys or slider.

  • No labels